acx-220_en.pdfACX-220
Wireless expander of wired zones/outputs
The ACX-220 module enables wired devices (detectors, sirens, etc.) to be used in the ABAX 2/ABAX wireless system. It has 4 programmable zones with support for the NO and NC type wire detectors and EOL, 2 EOL configurations, as well as 4 programmable relay outputs.
Configuration of settings and updating of firmware of ACX-220 are carried out remotely. In the ABAX 2 system, two-way radio communication is encrypted using is AES encrypted.
The expander is supplied with 12 V DC voltage and works together with the APS-412, APS-612 or APS-1412 buffer power supply units.
The device has a tamper switch that reacts to opening of enclosure.
- adding wired devices to the ABAX 2 or ABAX system
- compatible with:
- ABAX 2 system controllers (ACU-220 and ACU-280) and ARU-200 radio signal repeater
- ABAX system controllers (ACU-120, ACU-270, ACU-250 and ACU-100 (min. version 4.04), INTEGRA 128-WRL control panel and ARU-100 radio signal repeater - the required version of the device firmware should be checked in its description on the website
- range of radio communication in the open area:
- 4 programmable zones - support for wired detectors in NO, NC, EOL, 2EOL/NO and 2EOL/NC configurations
- 4 programmable relay outputs
- remote configuration and update of the firmware
- tamper protection
- power supply: 12 V DC, compatible with APS-412, APS-612, APS-1412
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Software
Certificates
Technical Data
Supply voltage
12 V DC
Enclosure dimensions
126 x 158 x 32 mm
Operating temperature range
-10 °C...+55 °C
Standby mode current consumption
35 mA
Max. current consumption
120 mA
Weight
204 g
Maximum humidity
93±3%
Operating frequency band
868,0 ÷ 868,6 MHz
Environmental class according to EN50130-5
II
Complied with standards
EN 50130-4, EN 50130-5, EN 50131-1, EN 50131-3, EN 50131-5-3
Security grade according to EN50131-3
Grade 2
Radio communication range (in open area) for ACU-120
up to 500 m
Radio communication range (in open area) for ACU-270
up to 500 m
Relay outputs (resistive load)
1000 mA / 24 VDC
Radio communication range (in open area) for ACU-220
up to 2000 m
Radio communication range (in open area) for ACU-280
up to 1600 m