cr-mf5_en.pdfCR-MF5
Keypad with the MIFARE® proximity card reader
The CR-MF5 keypad can operate as:
- INT-SCR partition keypad in the INTEGRA alarm system
- ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system
- keypad with proximity card reader in systems of other manufacturers (OSDP, Wiegand)
- standalone door control module
General characteristics:
- user identification by code and/or MIFARE® proximity card
- keypad with white backlight:
- 12 keys for entering the code
- 1 function key
- built-in MIFARE proximity card reader (13.56 MHz):
- Ultralight CSN/SSN
- Classic CSN/SSN/MSN
- DESFire (EV1 / EV2 / EV3) CSN/MSN
- supported OSDP protocol (OSDP protocol version 2.2; RS-485 bus)
- additional communication interface
- INT-SCR (operation in the INTEGRA system)
- ACCO-SCR (operation in the ACCO NET or ACCO system)
- Wiegand (operation in other manufacturer’s system)
- programming in the CR Soft program or using MC-SRV-8 service card
- LED indicators (3 pcs.)
- OC type output (BELL) controlled by the function key
- built-in sounder (volume adjustable)
- optical tamper protection against enclosure opening and removal from the wall
- suitable both for indoor or outdoor installation
Properties for each operation mode:
INT-SCR partition keypad in the INTEGRA alarm system
- functions activated by code and/or proximity card:
- arming/disarming and alarm cancelling in partition
- door opening
- control of 24. MONO switch and 25. BI switch type outputs
- confirmation of guard round
- activation of the temporary partition blocking function
- bypassing cash machine zones
- code change by the user
- functions activated without using a code / proximity card:
- quick arming
- alarm triggering from the keypad
- alarm muting on the keypad
- controlling access to a single door
- activation of an additional function using the function key (BELL)
- relay output for controlling an electric strike, electromagnetic lock or other device which activates the door
- door status input
- request-to-exit input
- configuration of the INT-SCR keypad settings – using the DLOADX program or the keypad
ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system
- functions activated by code and/or proximity card:
- door opening
- blocking / unblocking a door
- activation of an additional function using the function key (BELL)
- configuration of the ACCO-SCR keypad settings using the ACCO Soft (ACCO NET system) / ACCO SOFT-LT program (ACCO system)
Keypad with proximity card reader in systems of other manufacturer
- selection of the communication interface:
- OSDP (RS-485 bus)
- Wiegand
- activation of an additional function using the function key (BELL)
Standalone door control module
- support for up to 128 codes
- support for up to 128 proximity cards
- functions activated using a code / proximity card:
- door opening
- blocking / unblocking a door
- code change by the user
- possibility to specify the number of times a card/code is used
- activation of an additional function using the function key (BELL)
- relay output to control an electric door strike, magnetic lock or other device activating a door
- door status input
- request-to-exit input
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Software
Certificates
Technical Data
Supply voltage
12 V DC
Operating temperature range
-25°C...+55°C
Standby mode current consumption
65 mA
Max. current consumption
115 mA
Weight
129 g
Maximum humidity
93±3%
Dimensions
47 x 158 x 30 mm
Relay output (resistive load)
1 A / 30 V DC
BELL output, OC type
30 mA / 12 V DC
Reader operating frequency
13,553...13,567 MHz
Reading range for the MC-DF3-2 encrypted card
up to 45 mm