so-mf3_en.pdf
SO-MF3-W
MIFARE® proximity card reader
The CR-MF3 reader can operate as:
- proximity card reader in the INTEGRA alarm system
- proximity card reader in the ACCO NET or ACCO access control system
- proximity card reader in systems of other manufacturers (OSDP, Wiegand)
- standalone door control module
Characteristics:
- user identification by MIFARE® proximity card
- built-in MIFARE proximity card reader (13.56 MHz):
- Ultralight CSN/SSN
- Classic CSN/SSN/MSN
- DESFire (EV1 / EV2 / EV3) CSN/MSN
- supported OSDP protocol (OSDP protocol version 2.2; RS-485 bus)
- additional communication interface
-
- EM-Marin (operation in the INTEGRA, ACCO NET or ACCO system)
- Wiegand
- programming in the CR Soft program or using MC-SRV-8 service card
- LED indicators (4 pcs.)
- built-in buzzer (volume adjustable)
- optical tamper protection against opening of the enclosure and/or removing it from the wall
- available in white (SO-MF3-W) and black (SO-MF3-B)
Properties for individual modes of operation
Proximity card reader in the INTEGRA alarm system
- required connection to the INT-R expander for card / chip readers
- functions activated by proximity card:
- arming/disarming and alarm cancelling in partition
- door opening
- control of 24. MONO switch and 25. BI switch type outputs
Proximity card reader in the ACCO NET or ACCO system
- required connection to ACCO-KP series access control module
- functions activated by proximity card:
- door opening
- blocking / unblocking a door
Proximity card reader in systems of other manufacturers
- selection of the communication interface:
- OSDP (RS-485 bus)
- Wiegand
Standalone door control module
- support for up to 128 proximity cards
- functions activated by proximity card:
- door opening
- blocking / unblocking a door
- possibility to specify the number of times a card is used
- relay output for controlling an electric strike, electromagnetic lock or other device which activates the door
- door status input
- request-to-exit input
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Software
Certificates
Technical Data
Supply voltage
12 V DC±15% V DC
Operating temperature range
-25°C...+55°C
Standby mode current consumption
63 mA
Max. current consumption
112 mA
Weight
87 g
Maximum humidity
93±3%
Dimensions
45 x 128 x 21 mm
Relay outputs (resistive load)
1 A / 30 V DC
Reader operating frequency
13,553...13,567 MHz
Reading range for the MC-DF3-2 encrypted card
up to 55 mm