CR-MF5
Keypad with the MIFARE® proximity card reader
The CR-MF5 keypad can operate as:
- INT-SCR partition keypad in the INTEGRA alarm system
- ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system
- keypad with proximity card reader in systems of other manufacturers (OSDP, Wiegand)
- standalone door control module
General characteristics:
- user identification by code and/or MIFARE® proximity card
- keypad with white backlight:
- 12 keys for entering the code
- 1 function key
- built-in MIFARE proximity card reader (13.56 MHz):
- Ultralight CSN/SSN
- Classic CSN/SSN/MSN
- DESFire (EV1 / EV2 / EV3) CSN/MSN
- supported OSDP protocol (OSDP protocol version 2.2; RS-485 bus)
- additional communication interface
- INT-SCR (operation in the INTEGRA system)
- ACCO-SCR (operation in the ACCO NET or ACCO system)
- Wiegand (operation in other manufacturer’s system)
- programming in the CR Soft program or using MC-SRV-8 service card
- LED indicators (3 pcs.)
- OC type output (BELL) controlled by the function key
- built-in sounder (volume adjustable)
- optical tamper protection against enclosure opening and removal from the wall
- suitable both for indoor or outdoor installation
Properties for each operation mode:
INT-SCR partition keypad in the INTEGRA alarm system
- functions activated by code and/or proximity card:
- arming/disarming and alarm cancelling in partition
- door opening
- control of 24. MONO switch and 25. BI switch type outputs
- confirmation of guard round
- activation of the temporary partition blocking function
- bypassing cash machine zones
- code change by the user
- functions activated without using a code / proximity card:
- quick arming
- alarm triggering from the keypad
- alarm muting on the keypad
- controlling access to a single door
- activation of an additional function using the function key (BELL)
- relay output for controlling an electric strike, electromagnetic lock or other device which activates the door
- door status input
- request-to-exit input
- configuration of the INT-SCR keypad settings – using the DLOADX program or the keypad
ACCO-SCR keypad with proximity card reader in the ACCO NET or ACCO access control system
- functions activated by code and/or proximity card:
- door opening
- blocking / unblocking a door
- activation of an additional function using the function key (BELL)
- configuration of the ACCO-SCR keypad settings using the ACCO Soft (ACCO NET system) / ACCO SOFT-LT program (ACCO system)
Keypad with proximity card reader in systems of other manufacturer
- selection of the communication interface:
- OSDP (RS-485 bus)
- Wiegand
- activation of an additional function using the function key (BELL)
Standalone door control module
- support for up to 128 codes
- support for up to 128 proximity cards
- functions activated using a code / proximity card:
- door opening
- blocking / unblocking a door
- code change by the user
- possibility to specify the number of times a card/code is used
- activation of an additional function using the function key (BELL)
- relay output to control an electric door strike, magnetic lock or other device activating a door
- door status input
- request-to-exit input